Hear Technologies Hear Back PRO 16 Channel Monitor System 4 Pack
Hear Back PRO System
Assign each knob of a PRO Mixer to any mono channel, stereo pair of channels, or even a submix of up to 16 channels with the V6 update. Configure each Mixer differently and add up to 128 input channels to the system using additional Input Cards and Hubs (32 channels of inputs per Hub).
New Features
PRO Digital Overlay compatibility
PRO Connect web-based application compatibility
Allows 32 channel digital input cards (e.g. Dante, Waves, MADI)
Route-Assign-Submix up to 128 channels
Submix up to 16 stereo channels on each of the 16 knobs per Mixer
Up to 64 pairs of stereo-linked channels
Up to 32 input channels per Hub
Key Features
Panning width and stereo placement
Solo in place
Multiple Intercom
Preset copy and paste from one Mixer to another
Signal present indication on all channels
Mirroring function synchronizes all settings between multiple Mixers
Remote control of all settings via another Mixer
System Features
Hear Back PRO Mixer Features
FIRMWARE V6 or later:
PRO Digital Overlay compatibility
Local control of up to 138 channels of audio (128 channels + Stereo AUX IN + up to 4 stereo intercom inputs)
Submix up to 16 stereo channels on each of the 16 knobs
FIRMWARE V1 and V2:
Local control of up to 18 channels of audio (16 mono channels + AUX IN + Intercom IN)
Volume/panning/stereo link control of all audio channels
Remote control all settings from another Mixer
Receive power and audio over one Ethernet cable, up to 500' from Hub to each Mixer
24-bit Delta-Sigma D/A and A/D converters
Store up to 4 recallable presets
Intercom allows communication to anyone with a Hear Back PRO Mixer (up to 4 people at a time)
1/8' and 1/4' headphone outputs with 2.2 Watts of power per channel
Balanced mono/stereo, line level outputs
Selectable 1/8" TRS stereo unbalanced and XLR mono balanced (with 15V phantom power) AUX inputs:
Microphone input for crowd / ambiance mic or intercom use
Drum module / metronome or local mix input
Built-in 5/8" threaded socket to mount Mixer to any standard mic or desk stand
Hear Back PRO Hub Features
FIRMWARE V6 or later:
Allows 32 channel digital input cards (e.g. Dante, Waves, MADI)
Up to 32 input channels per Hub
Multiple Hubs daisy-chain for up to 128 input channels
Mix and match input types (ex. Dante and Analog)
FIRMWARE V1 and V2:
Three switch selectable 16-channel input sources:
Input A (Slots 1 & 2)
Input B (Slots 3 & 4)
HBus
Six user-selectable sample rates indicated by LEDs: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz
Note: Sample rates vary with interface cards:
Analog, Dante and AES/EBU - goes up to 192kHz
ADAT - goes up to 48kHz (SMUX not supported; ex. ADAT will down sample from 192kHz to 48kHz)
Waves - goes up to 96kHz
Less than .25 milliseconds total system delay (latency) from analog input to output
16 RGB LEDs intuitively display signal/peak levels for channel metering
Standard CAT5e/6 cabling delivers power and signals to Mixers
