ikmultimedia iRig Pro I/O

iRig Pro I/O Specifications

Microphone Input

• Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: 3.2 kOhms
• Gain Range: 40 dB
• Phantom Power: +48V ± 4V
• Frequency Response: 20 Hz - 20 kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

• Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
• Instrument Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 1 MOhms
• Gain Range: 27 dB
• Frequency Response: 20 Hz - 20 kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

• Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
• Headphone Level Control numbered thumbwheel
• Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

• Connector: 2x2.5mm TS Jack

Other Input/Output

• DC barrel: 1x DC barrel. For power and device charging.
• Device Connector: mini-DIN

Common

• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
• Power: 
  • USB bus powered when used with a computer 
  • Battery powered (2xAA included) when used with an iOS device 
  • DC power supply (not included, iRig PSU 3A sold separately)*

Package includes

• iRig Pro I/O universal Audio-MIDI interface
• Lightning to Mini-DIN connection cable (60cm/23.62")
• USB to Mini-DIN connection cable (60cm/23.62")
• 2 x 2.5mm jack to MIDI cable (160cm/63")
• 2 x 1.5V AA Battery
• Velcro strip

Dimensions

• Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
• Weight: ~120g/4.23oz (batteries excluded)
• Lightning to Mini-DIN connection cable: 60cm/23.62"
• USB to Mini-DIN connection cable: 60cm/23.62"
• 2.5mm jack to MIDI cable: 160cm/63"