SPL Transpressor Compressor and transient processor

The SPL Transpressor is the first processor that combines the two most important dynamic processing techniques: compression and level-independent treatment of transients. By blending these techniques in a single path, SPL aims to void the previous limitations of dynamic processing.

The Transpressor is designed as a single channel unit but you can always couple two in order to do some stereo processing. Our intent to offer a flexible and powerful audio processing tool, based on the interaction between transient processing and compression, is made evident by the freedom to place the modules in any order in the signal path. That way you can compress attacks that have been heavily amplified by the Transient Designer more precisely or enhance the transients once they have been compressed.

Specifications:

Inputs & Outputs
Electronically balanced instrumentation amplifiers

• Inputs: XLR and TRS
• Side Chain: TS
• Outputs: XLR and TRS
• Stereo Link/Slave: RJ?45, for 568?A cable
• Input impedance: 10?kOhm bal., 5?kOhm unbal., Side Chain ca. 80?kOhm
• Output impedance 150 Ohm bal., 75 Ohm unbal.
• Nominal input level: +4?dBu/-10?dBV
• Max. input level 20,5?dBu @ +4?dBu, 13,2?dBu @ -10?dBV
• Max. output level: 21?dBu

Input impedance: 10?kOhm bal., 5?kOhm unbal., Side Chain ca. 80?kOhm
Output impedance 150 Ohm bal., 75 Ohm unbal.
Nominal input level: +4?dBu/-10?dBV
Max. input level 20,5?dBu @ +4?dBu, 13,2?dBu @ -10?dBV
Max. output level: 21?dBu

Measurements
Frequency range (-3?dB): 10?Hz - ›?200?kHz

Common mode rejection: › 60?dB
(@1 kHz, 0?dBu input level and unity gain)

Total harmonic distortion: Transient Designer 0,004, Compressor 0,005
(in %, @ 1?kHz, 0?dBu input level and unity gain)

Signal to noise ratio (A-weighted)
Transient Designer: -96,4?dB, Compressor: -96,5?dB, overall: 94,6?dB

Dynamic range (unweighted)
Transient Designer: 114,5?dB, Compressor: 114,5?dB, overall: 112,5?dB

Filter
Low pass 1: 100?Hz, 18?dB/Octave
Low pass 2: 540?Hz,18?dB/Okcave
Band pass: 800?Hz-3,1?kHz, 12?dB/Octave

Power Supply
Toroidal transformer
Fuses: 230 V AC, 50 Hz: 315 mA, 120 V AC, 60 Hz: 630 mA
Voltage selector: 115V/230V
Power consumption: 19?VA

Dimensions and Weight
Housing (B x H x T): 482 x 88 x 239?mm
Depth including controls and sockets: 263?mm
Weight: 3,8?kg