The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
Features:
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
|
- JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
|
- VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
|
- Constant Curvature waveguide for unprecedented array coherence.
|
- Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
|
- Array Configuration Selector permits "array shading".
|
Specifications:
Power Rating | : | 1750 Watts Peak 875 Watts Continuous |
|
Frequency Range | : | 57 Hz - 20 kHz (-10 dB) |
|
Dimensions (H x W x D) | : | 349 mm x 597 mm x 444 mm (13.75 in x 23.5 in x 17.5 in) |
|
Frequency Response | : | 75 Hz - 20 Hz (+/-3db) |
|
Maximum Peak Output | : | 136 dB SPL at 1m |
|
Coverage Pattern | : | 100 x 15 nominal |
|
DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
|
DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
|
Audio Input Connector | : | XLR with loop through |
|
LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
|
HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
|
User Controls | : | Input Attenuator (0-16 dB) |
|
Signal Processings | : | DSP based, resident in Input Module |
|
AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
|
AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
|
AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
|
AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
|
Enclosure | : | 25/15 mm, 11-ply birch plywood |
|
Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
|
Finish | : | Black DuraFlex™ finish |
|
Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
|
Net Weight | : | 24 kg (52 lb) |
|
Optional Accessories | : | VRX-AF: Suspension array frame |
|