The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
Features:
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
|
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
|
- Integral rigging hardware for simple connection of enclosures and optional array frame.
|
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
|
- Large port area for reduced distortion.
|
Specifications:
Power Rating | : | 1500 Watts Peak LF: Dual-Bridged Technology™, Class D |
|
Frequency Range | : | 31 Hz – 220 Hz |
|
Dimensions (H x W x D) | : | 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in) |
|
Frequency Response | : | 34 Hz – 220 Hz |
|
Maximum Peak Output | : | 126 dB SPL at 1m |
|
Bandpass Nominal Impedance | : | LF: 2 x 2 ohms |
|
LF Driver | : | 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet |
|
Audio Input Connector | : | XLR with loop through |
|
User Controls | : | Input Attenuator (0-16 dB) Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru. |
|
Signal Processing | : | DSP based, resident in Input Module |
|
System Management | : | DSP based limiters for mechanical and thermal protection |
|
AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60Hz |
|
AC Line Voltage | : | User selectable: 120V/240V (-15%, +10%) |
|
AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
|
AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
|
AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
|
Enclosure | : | 18 mm birch plywood. |
|
Suspension / Mounting | : | Optional VRX-AF line-array frame kit or 10 mm forged eyebolts |
|
Finish | : | Black DuraFlex™ finish |
|
Grille | : | Powder coated, black, 16-gauge perforated steel with acoustically transparent foam |
|
Net Weight | : | 38.5 kg (85 lb) |
|
Optional Accessories | : | VRX-AF array frame SRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit |
|