ikmultimedia iRig Pro I/O
$178.01
In stock
Your new pocket-sized mobile studio
Now record with any of your gear on the go, and monitor in real time with any compatible device! That’s iRig Pro I/O, the ultra-compact professional quality audio and MIDI in/out for your mobile recording life!
Details
iRig Pro I/O Specifications
Microphone Input
- Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: 3.2 kOhms
- Gain Range: 40 dB
- Phantom Power: +48V ± 4V
- Frequency Response: 20 Hz - 20 kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
- Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
- Instrument Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 1 MOhms
- Gain Range: 27 dB
- Frequency Response: 20 Hz - 20 kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
- Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
- Headphone Level Control numbered thumbwheel
- Headphone Level Power 100mW into 50 Ohms
MIDI Input/Output
- Connector: 2x2.5mm TS Jack
Other Input/Output
- DC barrel: 1x DC barrel. For power and device charging.
- Device Connector: mini-DIN
Common
- Conversion: 24-bit A/D, 24-bit D/A
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- Power:
• USB bus powered when used with a computer
• Battery powered (2xAA included) when used with an iOS device
• DC power supply (not included, iRig PSU 3A sold separately)*
Package includes
- iRig Pro I/O universal Audio-MIDI interface
- Lightning to Mini-DIN connection cable (60cm/23.62")
- USB to Mini-DIN connection cable (60cm/23.62")
- 2 x 2.5mm jack to MIDI cable (160cm/63")
- 2 x 1.5V AA Battery
- Velcro strip
Dimensions
- Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
- Weight: ~120g/4.23oz (batteries excluded)
- Lightning to Mini-DIN connection cable: 60cm/23.62"
- USB to Mini-DIN connection cable: 60cm/23.62"
- 2.5mm jack to MIDI cable: 160cm/63"